How is ozone created?
Ozone is a naturally occurring molecule created in one of two ways:
- Lightning: When lightning passes through the air, the electric current produced passes through and fractures the oxygen (O2) to create ozone (O3).
- UV light: Oxygen in the presence of 185 nm UV light creates ozone.
Both methods separate the oxygen molecule to form ozone.
How does an Ozonics Unit create ozone?
Everything required to generate ozone is contained in the unit itself—you don’t need to add any powder or liquid. As long as you have a charged battery and the unit is on, it is producing ozone. Ozonics utilizes a process called the corona discharge method to create ozone, which is the same method lightning uses to create ozone naturally. In an Ozonics Unit, oxygen from the air is pulled into the unit and forced between high-voltage plates to simulate the corona discharge method. The oxygen (O2) is broken apart and recombines to form ozone (O3). The ozone is then dispersed from the front of the Unit with a whisper-quiet internal fan.
Is ozone safe?
The U.S. government performs tests and develops safety standards for numerous materials/compounds—including ozone—and approves them as safe for human use. Ozonics designs, builds and tests its products to meet or exceed federal safety standards put in place by the U.S. government when used properly used both outdoors and in confined spaces, such as a ground blind.
When properly set up—in an open-air environment or in a ground blind—you should not smell ozone. When using an Ozonics, it’s not uncommon to smell ozone occasionally/rarely as the wind varies and swirls, but if you smell it often, the wind has switched and you need to augment your setup accordingly. You always want to focus the concentration of ozone on the downwind side of your setup, forcing the ozone to attack your human odor as quickly as possible as it leaves your body—not the odor directly on your body (see “How do I use my Ozonics in a treestand/ground blind” below).
In summary, when your HR Unit is set up correctly, you will not be exposed to ozone except when the wind shifts—and this is an indication to adjust or modify your setup.
How does ozone destroy human odor?
Ozone’s ability to destroy, alter and reduce human odor has been well documented, and it has been used in various industries for this purpose for more than 100 years. While an oxygen molecule (O2) is relatively stable, ozone (O3) is very unstable, and seeks to revert back to its more stable state, as oxygen (O2). As a result, ozone readily bonds with and reacts with other compounds, including human odor. When this oxidation process occurs some compounds are completely destroyed and others are altered in such a way different compounds are created. Animals might detect these new compounds, but they do not associate them with humans, and as a result, are not threatened. Ozonics patent-protected technology has shown that ozone can mitigate (destroy and alter) airborne odors at lower levels than previously understood, and that ozone can dramatically decrease the amount of human odor in your scent zone (scent stream) when the two come in contact.
How do I use my Ozonics in a treestand?
Ozonics HR Units feature two modes for in-the-field use: Standard and Boost mode. Boost mode was specifically created to maximize ozone output for open-air environments such as a treestand set or other open-air situations, such as spot-and-stalk or hunting from the ground.
- Mount your Ozonics HR Unit 8-12 inches above your head.
- Under average wind conditions (3-12 MPH), adjust the HR Unit by pointing it downward at a 30-degree angle.
- CHASE THE WIND (TIME + CONCENTRATION = SUCCESS)
- It’s critical that the front face of the unit always points in the direction the wind is blowing (downwind). This directs the heavier ozone molecules to fall into your scent stream being carried by the wind, altering and destroying your odor in the process.
- To achieve the best results, you should be adjusting your HR unit as necessary or “chasing the wind” throughout your hunt to always point directly down wind.
- This will flood your scent zone with a concentrated stream of ozone, maximizing the amount of time the ozone has to interact with your scent molecules (odor being released into the air stream by you), and maximizing the amount of ozone that attacks those same molecules.
- In high-wind situations (greater than 12 MPH,) increase effectiveness by bringing your HR Unit in closer to your body/scent profile, and position it at a sharper downward angle (75-80 degrees) this aids in forcing the ozone into the airstream closest to the downside of your body before your concentration of ozone can be diluted by the higher winds.
- In low or no wind, maximize effectiveness by angling your HR Unit down at a steeper angle (up to 90 degrees—or straight down—depending on wind speed), to chase your scent molecules as they fall directly below you. Take care to concentrate ozone as close to your setup as possible without showering the ozone directly on you and wasting it.
How do I use my Ozonics in a ground blind?
Use of an Ozonics HR Unit in a blind is an incredibly effective method of scent elimination with the proper setup. By manipulating the window openings, you can direct and control airflow, and ultimately scent and ozone flow. In so doing, you are able to hyper-ozonate any air that is leaving the blind, maximizing the amount of time the ozone has to interact with your scent molecules and maximize the amount of ozone that attacks those same molecules (time + concentration = success), thus maximizing your scent elimination.
- Determine wind direction
- Create a small opening in the window on the side the wind is coming from. This will let air into the blind and is the starting point for creating and controlling your airflow.
- Create a small window opening on the opposite side of the blind and lower if possible. This will create a chimney effect, where the air will come in on one side of the blind and be forced to exit out the other side the blind.
- Position your Ozonics unit above the downwind or exit window opening. For hub-style pop-up blinds, utilize the specially designed Ozonics Blind Clip.
- Point the unit downward and directly toward the exit window opening. The airflow will be restricted and force your scent and the ozone out of the blind. This process is called hyper-ozonation, and as the concentrated ozone contacts your scent as they leave the blind together, it destroys, alters or renders your odor indistinguishable.
Can I use an Ozonics Unit to deodorize my hunting clothes and gear?
Ozone is a well-known and proven deodorizer and sanitizer, and it can be used for de-scenting clothing and other gear as a form of passive scent control. The Ozonics DRiWASH bag is designed specifically for using ozone generated by an Ozonics HR Units to deodorize your hunting clothing and other gear. With your HR Unit placed on top of the DRiWASH bag, ozone is directed through a specially designed baffled airflow system, across all of the content inside, and then out through a vent in the front of the DRiWASH bag. The Ozonics HR300 features an automated, ten-minute DRiWASH cycle, providing care free, one touch operation. The HR200, requires, a more hands on, 20-minute manual process when used with the DRiWASH bag. When the DRiWASH bag is used with either Ozonics HR Unit, you can effectively deodorize your hunting clothing and gear no matter where you are.
Note: Ozonics asserts that the most effective form of scent elimination is through active scent control—using your Ozonics unit in the field while you’re hunting to continuously eliminate, alter and reduce your odor to levels where it is no longer perceived as a threat by the animals you hunt. Using your DRiWASH system prior to the hunt and your Ozonics Unit during the hunt will maximize the use and effectiveness of ozone, providing you with the most effective scent management system in the industry today.
Will ozone harm my hunting gear?
When utilized correctly, ozone will not harm clothing or gear. However, if ozone is pumped indiscriminately onto your gear for long periods of time in high concentrations—and depending on what type of material it is—yes, it could harm your gear.
If you pour a gallon of bleach directly onto your clothes in the washing machine, you will degrade and destroy those clothes. But if you use a cup of bleach dispensed in the right cycle, you clean and sanitize those clothes—ozone is no different. Use the right amount of ozone for the right amount of time and you deodorize and sanitize your hunting gear without harming them.
Can Ozonics be used in rain, snow or fog?
An Ozonics HR Unit should never be used in any type of wet weather situation heavier than a dense fog or light snow. Because of the design requirements to produce ozone, the internal components of your HR Unit are not waterproof and should not get wet. When properly used, your HR Unit should be set at a 30-degree downward angle, and the front grille facing downwind. This configuration will naturally minimize the amount of moisture entering the HR Unit, but moisture can also be pulled into your HR Unit through the air intake opening on the bottom of the unit. When in doubt, it’s best to put your HR Unit in a dry location. Should your HR Unit become wet internally, do not operate your Ozonics HR Unit until it has thoroughly air-dried.
Will Ozonics work in swirling winds?
Yes, Ozonics will destroy human scent in swirling winds. However, because ozone is a gas and gasses are blown readily by the wind, effectiveness can be affected due to increased dilution of your ozone concentration. Here are some tips for boosting ozone concentration when using your Ozonics HR unit in windy conditions:
- Hunting from a ground blind: See “How do I use my Ozonics in a ground blind?”
- Hunting from a treestand: Hunting from a treestand is where swirling winds become the biggest factor because ozone is a gas and must contact the scent molecules emitted by the hunter for the scent to be eliminated, altered or reduced to levels no longer perceived as a threat.
- First, place the HR Unit 4-6 inches (instead of the standard 8-12 inches) overhead so you can readily redirect the output as the wind changes directions. (Note: Be careful to ensure the unit does not interfere with the drawing of your bow.)
- Chase the wind: Direct the HR Unit down-wind and downward as close to the hunter as possible.
Will ozone eliminate my scent trail?
The key to utilizing the effectiveness of ozone as a scent elimination tool is maximizing time and concentration—forcing as much ozone as possible to contact emitted human odor for as long as possible. Here are two methods, one “passive” and one “active”, for using ozone to minimize your scent footprint:
a) Use the Ozonics DRiWASH bag, in conjunction with your HR Unit, to cleanse and deodorize your hunting clothing and gear prior to the hunt using the proper amount of ozone for the proper amount of time. This will destroy human scent molecules clinging to your clothing and prevent them from transferring to vegetation and leaving a scent trail. This is considered passive scent control because although it is very effective, it is a preventative action taken before the hunt begins.
b) Use the Ozonics Kinetic pack, in conjunction with your HR Unit, to actively control the odor your body emits while you’re on the move during your hunt, walking to and from your stand, or checking game cameras. The Kinetic features an innovative internal design that allows your HR Unit to operate on the move, just as it does in a stationary location, such as a treestand or ground blind—maximizing ozone output and directing ozone into your scent stream to eliminate, alter or reduce your scent to the point that is no longer perceived as a threat by game animals. This is considered active scent control because it actively attacks your human scent during every moment of your hunt.
Can the effectiveness of an Ozonics Unit be quantified?
If your Ozonics is used correctly, you will see a dramatic reduction in the number of downwind “busts” by game animals. There are many factors in this success, and these hunters have years of product use in the field coupled with complete understand of how the product should be used is a wide variety of circumstances and weather conditions. In some cases, these hunters go above what many hunters will do and might even use more than one HR Unit in strong or extreme swirling winds. This is simple acknowledgement the product is effective, but does have limitations: Remember, ozone must contact the odor for the hunter to be effective at killing scent. Time and concentration will allow the ozone to eliminate, alter or reduce human scent to the point where animals no longer perceive it as a threat.
Do animals smell or react to ozone?
The short answer: No. Ozone is found in the environment at all times in parts-per-million (ppm) quantities. Ozone concentration increases naturally in nature whenever lightning strikes occur, a volcano erupts, or similar natural event. Ambient ozone exists in the environment in concentrations between 0.001-0.03-ppm, depending on the local environment. Ozonics produces oxygen in concentrations sufficient only to eliminate airborne odors related to humans. Ozone has a half-life of approximately 20 minutes unless it contacts a substance and reacts. Ozonics research reveals that ozone (03) will revert back into oxygen (02) by the time it has traveled roughly 20 feet from the hunter, leaving limited opportunity for an animal to smell ozone.
Will ozone work on all animals that use their nose to detect danger/hunters?
Ozone destroys or alters human scent upon contact, so with a proper set-up these scent molecules rarely get more than 10 feet downwind in most hunting conditions. When an ozone molecule comes in contact with human scent molecule, that scent molecule will be eliminated, altered in such a way that animals do not recognize it as human, or reduced to the level where animals do not perceive a threat. Time + concentration = success. Maximum scent elimination is achieved when the maximum amount of ozone interacts with human scent as quickly as possible for as long as possible.
How might animals respond when hunting with an Ozonics Unit?
Proper setup and application of your unit is primarily a game of two factors: TIME and CONCENTRATION.
Depending on correct set-up and the environmental challenges present you may see different animal responses when hunting.
- No response. No reaction from the animal is the most common response. When the odor you release into the scent stream encounters enough ozone (concentration factor) for long enough (time factor) to destroy all of your scent—no animal response is the result.
- The animal smells “something.” This is a relatively common response, though it’s not always clear whether animals are reacting to altered human scent molecules or detecting an unusual void in odors altogether. The animals will sense something and use their nose to test the wind to determine what it is. In most situations, such animals will continue on with normal behavior, though they might continue to test the wind and look toward the hunter’s position. A small number of animals will become curious and further attempt to determine what they smell. Some will not be curious and will leave the area—but they will not “bust.”
- On very rare occasions, when properly set up, an animal might still wind a hunter. There are some exceptional environmental conditions, such as very high or extreme swirling winds, where your time and concentration factors are reduced to the point that a single HR unit cannot produce enough ozone (concentration factor) and keep it in the downwind area long enough (time factor) to destroy, alter and reduce your released odor to the point the animal doesn’t become alarmed. However, under nearly any hunting conditions, with the right setup of your Ozonics HR Unit, the number of animals that bust from winding a hunter will drop dramatically.
What comes in the box when I purchase an HR300?
- HR300 in-the-field ozone generator
- EZ Mount, EZ Mount tree bracket and replacement stud
- Smart battery (5-hour run time on Standard mode, 4-hour run time on Boost mode)
- Smart Charger, Smart Charger power cord and A/C Smart Charger adapter
What comes in the box when I purchase an HR200?
- HR200 in-the-field ozone generator
- Standard mounting bracket
- Standard battery (5-hour run time on Standard mode, 4-hour run time on Boost mode)
- Standard battery charger
What are the main feature differences between the HR300 and HR200?
- The HR300 produces 45 percent more ozone than the newest version of the HR200. This gives you the ability to hunt certain situations that before would have exceeded the capability of one HR200 Unit, such as winds above 15 mph.
- The HR300 uses a different battery and charger than the HR200. The HR300 uses a Smart Battery and Smart Charger, meaning the battery and the charger “talk” to each other to maximize run time, charge effectiveness and overall battery life cycle.
- The HR300 has a new DRiWASH mode programmed into the Unit for use with the DRiWASH Gear Bag for eliminating scent on hunting gear. This is called “PULSE Technology” and is an automatic 10-minute cleansing cycle. The HR200 can also be used with the DRiWASH Gear Bag, but the process is a manual process and takes longer.
- The HR300 has been ergonomically designed to be much easier to use in low-light, no-light situations with gloved hands. Unit operation has been simplified by reducing the number of buttons and increasing their size and changing their shape. The battery is much easier and quieter to take out and put in, even with gloved hands. For these reasons, the HR200 features low-glow LED utility lights, and the HR300 does not.
- The HR300 comes with an EZ Mount included.
- Comparison video between the HR300 and HR200
Does an HR300 produce more Ozone than an HR200 Unit?
Yes. The HR300 produces 45 percent more ozone than the newest version of the HR200.
How much noise does an Ozonics HR Unit make?
All Ozonics HR Units are designed to produce enough ozone to destroy human odor while operating in near silence. Each HR Unit utilizes an internal fan to pull oxygen (O2) into the HR Unit, convert it to ozone (O3) and direct it out the front of the HR Unit. And the housing on both the HR300 and HR200 are design to squelch noise produced by the internal fan. In short, the fan produces minimal noise and will not spook game, even in dead-calm conditions.
What maintenance is required on my Ozonics HR Unit?
As your HR Unit ages and the coil is exposed to airborne particulate, internal parts will eventually get dirty and begin to degrade and this can cause loss of effectiveness over time. This happens more quickly in extremely dusty and high-humidity environments. You can inspect the internal coil of your HR unit by turning on your HR Unit in a dark room and looking at the coil through the front grille while the HR Unit is running. The entire coil should be glowing purple. If you see dark spots on the coil, this indicates the areas of the coil that have become dirty—as these dark areas increase, the amount of ozone produced decreases. It’s recommended to use a can of moisture free compressed air blown into the front grille on the unit to periodically remove dust and debris built up on the inside.
How do I properly store my Ozonics Unit and batteries?
When getting ready to store your HR unit and its accessories for prolonged periods of non-use, proper storage of the Ozonics batteries will lead to increased life and optimal performance.
HR200: When you’re ready to store the battery for long periods of time, the battery will need to be placed into an optimal charge level. To put the battery in optimal storage condition, first charge the battery to full in the Ozonics charger, then place battery into unit. Turn the HR Unit on and place in to boost mode. Let the HR Unit run in a well-ventilated area for 2-3 hours if the battery is the standard battery, and 4-5 hours with an XL battery. Turn off the HR Unit and remove the battery. Store the battery in a dry location between 70-80 degrees Fahrenheit. Do not store battery in the HR Unit or in the battery charger.
HR300: When you’re ready to store the battery for the HR300, simply place the battery into the HR300 charger and press and hold the “Storage” button on the front until the red LED starts to flash. The charger will go through a cycle that will automatically place the battery in the optimal charge level. When the battery is ready, the LEDs will toggle between red and green. The battery and charger may be warm to the touch during and after Storage mode is initiated—this is normal. Remove the battery from the charger and store in a dry location between 70-80 degrees Fahrenheit. Do not store battery in the HR Unit or in the battery charger.
Do not store the battery in excessively hot or excessively cold areas. Storage in temperature extremes will lead to shortened battery life or diminished run time.
How long will the battery last in the field?
HR300 Smart Battery
- Standard Mode: 5 hours
- Boost Mode: 4 hours
HR300 Smart XL Battery
- Standard Mode: 10 hours
- Boost Mode: 8 Hours
HR200 Standard Battery
- Standard Mode: 5 hours
- Boost Mode: 4 hours
HR200 Standard XL Battery
- Standard Mode: 10 hours
- Boost Mode: 8 Hours
How long does it take to charge the battery after a full discharge?
Recharging your Ozonics battery is a simple process, and the time to recharge your battery depends on the type of battery and also which unit it is for. The HR200 and HR300 batteries are not the same and have different chargers as well.
HR200: First—and this is very important—plug the EMPTY battery charger power supply into the wall outlet first and the green LED will illuminate. Wait 10 seconds and then place the battery into the HR200 charger and the LED on the wall power supply will change from green to red to indicate charge. A fully depleted HR200 Standard battery will take 3-4 hours to charge, and the XL battery will take 6-7 hours to fully charge.
HR300: First, plug the AC line cord into the power supply and then into the AC wall socket. Then plug the cord from the power supply into the EMPTY charger. Wait 10 seconds and then place the battery into the HR300 charger and the red “Charge” LED will illuminate to indicate charging is in progress. A fully depleted HR300 Standard Battery will take 2-3 hours to charge, and the XL Battery will take 4-5 hours to charge.
What are the dimensions of my Ozonics HR Unit?
Both the HR300 and HR200 Units have been designed to be as compact and portable as possible, so as to not take up valuable space in your pack when heading out for a hunt. The HR200 unit stands 3.2 inches tall, with a width of 7.3 inches and measures 5.7 inches front to back. The HR300 unit stands 2.5 inches tall, with a width of 7 inches and measures 6.5 inches front to back.
7.3” W x 3.2”H x 5.7” L
7” W x 2.5” H x 6.5” L
What is the weight of the HR Units?
The HR units were designed to be as light as possible and still be an effective scent elimination device. The HR300 Unit weighs 1 pound. The HR200 weighs 14 ounces. Each of the Standard batteries for the HR 200 and HR 300 weighs 6 ounces, and an XL battery for either a HR300 or HR200 Unit weighs 11 ounces.
Can I buy a third-party coil online and replace it myself?
Yes, you can, but there are some important reasons why we do not advise this approach:
First, opening your Ozonics HR unit voids any warranty left on the product. If there are any signs of tampering, we (Ozonics) reserve the right to decline the recertification or replacement of the HR unit. More importantly we (Ozonics) have spent many years testing and developing detailed processes for the testing and performance of your HR unit. Following our testing methodology, only we can ensure that that your HR unit is functioning at the optimal level.
The most important reason not to purchase a third-party replacement coil online is because we (Ozonics) have researched and performed countless hours of testing on functionality and performance of various materials to ensure that we will provide you the longest possible life expectancy of your HR Unit. The fact is, not all materials are created equal and not all materials will perform the same. We only use the best materials. These materials are selected to provide the longest life and highest performance standard for you as a hunter.
What is the expected life of my Ozonics Unit? Is there a warranty? Is there a Money back Guarantee?
The life cycle of your Ozonics HR Unit can be influenced by several variables, most notably:
- Your care and handling of your HR Unit
- How much you use your HR Unit (total runtime hours)
- The environmental elements your HR Unit is exposed to during those hours
Ozonics guarantees 100 percent product replacement for your HR200 or HR300 on any workmanship or component defects limited to 1 year from date of purchase. All batteries and accessories have a 100 percent product replacement guarantee for workmanship or component defects for 6 months from date of purchase. Please note: The Ozonics Money Back Guarantee was discontinued and expired effective December 31, 2015.
How will I know when my Ozonics Unit needs to be serviced or replaced?
Ozonics recommends returning your HR200 or HR300 to Ozonics after no more than 3 full seasons of use to have the product recertified to perform at its best and meet Ozonics Quality Standards (OQS).
To help maintain your HR Unit in the best possible condition, Ozonics developed the OzoniCare program, designed to inspect, repair, recondition, test and certify your HR Unit to Ozonics Quality Standards (OQS) to give you the peace of mind that it’s performing at its best. Visit the OzoniCare page on our website or call our customer service department (979.285.2400) for more information.
How does the OzoniCare recertification service work?
Ozonics recommends returning your HR200 or HR300 to Ozonics after no more than 3 full seasons of use to have the product recertified to perform at its best and meet Ozonics Quality Standards (OQS).
Recertification Costs Per Unit: HR200 Unit = $129 plus tax / HR300 Unit = $169 plus tax
We require that you pay the cost of shipping your HR Unit to us, and we will pick up the shipping tab when we send your “ready for battle” HR Unit back to using US Priority Mail (2-3 days).
Although we can address almost anything that might happen to your HR Unit from normal use, there will be some extreme cases where the repair and recertification of your HR Unit is not possible, and Ozonics reserves the right to determine if the Unit can be refurbished. If, for any reason, we cannot breathe new life into your HR Unit, we will call you directly to discuss other options.
In order to minimize turn-around time, when we receive your HR Unit for OQS recertification, we will return an equal to or newer vintage certified HR Unit to you within 10 business days from receipt of your product at the Ozonics facility. (Please note: Because of the short turn-around, you will not get your exact Unit returned to you). We will ensure the HR Unit you receive has been certified to meet or exceed its original performance specifications. For customers outside of the United States, Ozonics will pay up to $15 for shipping costs—non-domestic customers are responsible for paying all additional shipping fees and duties.
We also understand that if your HR Unit has become a part of your hunting family and you desire the exact same unit sent back to you, we can accommodate that request—however, this increases turn-around time from 10 business days to approximately 6-8 weeks, so please plan accordingly.
Note: Because of the stress placed on the connection points of your HR Unit in the assembly and disassembly process, your HR Unit can only be recertified one time. This ensures the quality and consistency of the HR Units that we recondition, and the HR Unit will be permanently marked in a discrete way that will ensure Ozonics knows the status of the unit.
I have an Ozonics HR200 but want an HR300. Can I trade-in my old unit?
Ozonics does not currently offer any trade-in program. However, Ozonics does offer OzoniCare, which is a recertification and product maintenance program designed to keep your Ozonics HR Unit clean and performing at optimum levels according to Ozonics Quality Standards.
Will Ozonics diminish the effectiveness of a ThermaCell?
Because ozone is a highly unstable molecule that attaches to whatever it contact first, and Ozonics Unit might diminish the effectiveness of a ThermaCell if the ozone produced by the Unit first contacts the insect repellant molecules produced by the ThermaCell before it contacts human scent molecules.
However, with the proper application, both can be used together:
- In a treestand: Position the ThermaCell upwind of your setup with the Ozonics Unit producing ozone on the downwind side of your setup.
- In a ground blind: For proper use of an Ozonics Unit in a ground blind, see “How do I use my Ozonics in a ground blind?” Position the ThermaCell upwind of the HR Unit.
What can I do to maximize battery life of my HR Unit?
Your Ozonics HR Unit is an electronic device that’s powered by a compact, rechargeable Li-ion battery. To achieve optimal battery performance and maximize the extended life of the battery, follow these recommendations:
- Do not store the battery in the HR Unit for extended periods of time. It’s acceptable to leave the battery in the HR Unit for a few days when not being used—such as during the week between weekend hunts. The HR Unit is continuously pulling a small amount of power from the battery, even in the “off” state. If the battery is left in the HR Unit for extended periods of time, it will drain the battery completely, potentially resulting in decreased run-time performance from the battery, or shorten the battery’s useful life.
- Do not store the HR200 or HR300 battery in the HR charger. After a battery has reached a full charge and the green indicator LED is illuminated, remove the battery from the charger and store it in a cool, dry location until its next use. Never leave the battery in the charger if the charger is unplugged. The charger will slowly drain the battery, which can result in decreased run-time performance or shortened battery life.
- At the end of your hunting season, make sure to properly store your HR battery. A li-ion battery should not be stored for long periods of time (several months during the off-season) in a fully charged state OR in a fully discharged state. A li-ion battery needs to be stored for long periods of time in a state that is approximately 50 percent full.
- To obtain a 50 percent charge on your HR200 battery, charge the battery to completion in the HR200 charger until the green LED indicator is illuminated. At this point, remove the battery from the charger and place it into the HR200 unit. Run the HR200 on Boost mode for 2.5 hours with a Standard battery, or for 5 hours for an XL battery, in a well ventilated area. Turn the unit off, remove the battery and store it in a cool dry location (60 to 85 F is preferred) for the duration of your off season.
- To obtain a 50 percent charge on your HR300 Smart Battery, place the battery in the HR300 charger. Press and hold the button on the front of the unit that says, “Press for Storage,” until the red LED starts to blink at a once-per-second rate. Release the button. In this mode, the charger will charge the Smart Battery to the 50 percent state and indicate the battery is ready by alternately blinking between red and green. Remove the battery from the charger and store it in a cool dry place (60 to 85 F is preferred).
- Cycle your HR batteries during the off season. A li-ion battery can lose its effectiveness when it rests unused for long periods of time. It’s good practice in the off season to take your HR battery and cycle it periodically, every 2 months. Take the battery and fully charge it, then run it in the HR Unit until the unit shuts off. Return the battery to the 50 percent storage condition as listed per HR200 or HR300 battery storage instructions.
- Do not charge your HR batteries in extreme temperature conditions. If the temperature is below 32 degrees Fahrenheit or above 100 degrees Fahrenheit in the location where you wish to charge your HR battery, locate a location that’s within the temperature extremes. Ideal charging temperatures are 55-85 degrees Fahrenheit.
- If you repeatedly charge your HR200 battery in temperature conditions below 32 degrees Fahrenheit or above 100 degrees Fahrenheit, you could reduce useful life of the battery pack.
The HR300 battery is a Smart battery, meaning it has an electronic circuit that monitors many battery parameters, including temperature. If the battery determines it’s out of the recommended temperature range, it will instruct the HR300 battery charger to reduce its charge rate or completely cease charge to protect the battery. Charging in extreme temperature conditions with the HR300 Smart battery can lead to charge times in excess of 12 hours.
How do environmental conditions affect battery performance?
Environmental conditions can affect the battery charge and run times, in addition to the performance of the HR Units. The run time of all HR batteries during your hunts can be minor or greatly affected by the environmental conditions the battery experiences. Because the battery is an electro-chemical device, several conditional factors might affect the ability of the battery to produce a desired run time. A battery has a certain amount of stored energy it can deliver to the HR Unit, which is called “capacity” and rated in mAhr (which is listed on the battery label). In the HR unit, higher capacity is equal to longer run time.
- Battery age: A battery’s capacity is rated at a certain capacity value, as determined by a new, unused battery. Because the battery receives its electrical potential from a chemical reaction, over time that reaction does not happen as efficiently as when the chemical reaction was new. Therefore, over time, the battery cannot achieve the same capacity as it did when it was brand new because the chemical process slowly wears out with time and use.
- Battery usage: With every use of a battery—a discharge in the unit and recharge in the charger—the available capacity of the battery is slightly reduced. The more times a battery is used, the more that capacity is reduced.
- Cold temperatures: Because the battery is producing electrical potential due to a chemical reaction, the reaction slows down as the battery gets cold. Diminished run times of a battery are common when it’s exposed to a cold environment.
- Hot temperatures: HR batteries should never be exposed to high temperatures, such as being left in a vehicle during a hot day. Repeated exposure to high heat environments will diminish the runtime and overall life of your HR battery.